(6) 1200 PSI Hard Surface Extractor
1200 PSI Hard Surface Extractor (35)
1.0 Safety Instructions Continued
Turn off all controls before unplugging. This is not a toy. Close attention is necessary
when used around or near children. Use common sense to protect yourself and others
from injury when using the machine and always wear the appropriate clothing and safety
equipment when operating the unit.
• DO NOT leave the machine when plugged in. Unplug it from the outlet when not in
use and before servicing.
• DO NOT use this equipment with a damaged cord or plug. If the unit is not working
as it should because it has been dropped, damaged, left outdoors, etc., contact an
authorized service center.
• DO NOT unplug the equipment by pulling the cord. To unplug, grasp the plug, not the
cord. DO NOT pull the unit by the cord, use the cord as a handle, close a door on the
cord, or pull the cord around sharp edges or corners. Keep the cord away from heated
surfaces. Lift using only the appropriate handles.
• DO NOT overstretch the safety power cord between the equipment and the electrical
outlet in the wall.
• DO NOT move the machine up or down stairs with fluid in the machine. Drain
solution and recovery tanks before moving the unit up or down stairs. Use extra care
when cleaning on stairs.
• DO NOT handle the plug of the equipment with wet hands.
• DO NOT expose to rain or use on wet surfaces, to avoid electric shock. Store indoors.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements
will damage components and void warranty.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
• DO NOT use the equipment to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
• DO NOT use where oxygen or anesthetics are used.
• DO NOT put objects into openings or use with any openings blocked. Keep free
of dust, lint, hair and anything that may reduce air flow. Keep hair, loose clothing,
fingers, and all body parts away from openings and moving parts to ensure safe
operation.
• DO NOT use if any hoses or nozzles are damaged, cut or punctured.
• DO NOT allow pump to run dry. Always maintain an adequate solution level to supply
solution pump.
• DO NOT use Citrus Acid, Buterol or harsh degreasers inside the machine.
• DO NOT lubricate the motor. If the motor is lubricated, this will VOID your warranty.
12.0 Base with Pump Components Parts List
Drawing No.
Item No.
Description
Quantity
58
10-0832
S/R Strap Bolts
1
59
10-0834
Pump Flat Washer
16
60
10-0831
S/R Bracket for Extractor
1
61
80-0112-UN
12-- PSI Unloader Valve / Regulator
1
62
80-0059-4
1200 PSI Extractor Gauge
1
63
10-0838
Pigtail for Extractor
2
64
10-0850
Strain Relief for Extractor Pigtail
2
65
10-0851
Strain Relief Nut for Extractor Pigtail
2
66
10-0822
Exhaust Grate
1
67
10-0835-N
Nut for Pump Bolt on Extractor
4
68
10-0835-B
Pump Bolt
4
69
10-0834
Flat Washer
4
70
80-0112
1200 PSI Pump Kit (Includes Hoses)
1
71
10-0826
3/4” Hose Clamp
2
https://harrissupplyind.com - To Order Parts Call 608-268-8080
