V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230298
SET-UP AND CODE DESCRIPTION (CONTINUED)
JoG
Jogging the Column
Pressing selection button two at the “
JoG
” mode, will enter into the Jog test mode. Upon entry
into the Jog test mode the display will show the first summary test, “
COL1
” (column 1). Pressing
selection button one will scroll through the column selections. Pressing selection button two will
access
for
(forward) or
rEU
(reverse). Pressing selection button two again will move the
motor in the desired direction. To exit the setting, press selection button three.
dSP
Display Testing
Pressing selection button one at the Jog test mode will advance the controller to the Display test
mode. Upon entry into the Display test mode the display will flash a series of lines and dashes if
all characters in the display are operational. To exit the setting, press selection button three.
rELY
Relay Testing
Pressing selection button one at the display test mode will advance the controller into the Relay
test mode which allows the user to test the lights, compressor, evaporator fans or the heater.
Upon entry into the relay test mode the display will read “
cnPO
” for the compressor test. To
scroll through the components for testing, press selection button one. To activate the
component, press selection button two and the “
0
” will begin to flash. Use selection button one
to toggle between “
0
” (deactivate) and “
1
” (activate). Pressing selection button two will activate
the component if the display reads “
XXX1
”. To exit the setting, press selection button three.
CnPO/1
– Compressor test
Lit0/1
– Light test
FAn0/1
– Evaporator fan test
Htr0/1
– Heater testing
cASh
MIS Data – Cash Mode
If selection button two is pressed at the “
CASh
” prompt, the display will show the non-
resettable historical amount of money accepted by the machine. If selection button one is
pressed, the display will show “
SL 1
”(selection one) and the amount received for selection
button one. Continue pressing selection button one to scroll through all of the selections. To
exit the setting, press selection button three.
V21
12.1 Programming Trade | P3-5
