V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230263
MIS Reset W/DEX
On - MIS data will be reset with a DEX read.
Off - MIS data will not be reset with a DEX read.
Display Scroll * (Available on version 14 and above)
On - The messages will scroll across the display and change.
Off - The messages will blink and change.
EMS DEX * (Available on version 14 and above)
On - The Energy Management System Sales pattern in the vendor can be captured via the
DEX data read.
Off – The Energy Management System Sales pattern in the vendor will not be sent out
via DEX data read.
Depth Learning * (Removed from version 14 and above)
On - The control board will “learn” the depth setting after one row of product in the
column is vended.
Off - The control board will not “learn” the depth setting.
Space to Sales:
Allows you to map the columns with the selection buttons.
Space to sales can be set by either choosing one of the 10 preset configurations or you can have
the option of doing a custom space to sales.
For space to Sales mapping, refer to Inner Door Label STS or STS Label in the manual.
To change current setting:
1.
Press Button 4 when “Space to Sales” is displayed.
2.
Press Button 4 to change current setting.
3.
Press Button 2 or 3 to scroll through available settings.
4.
Press Button 4 to save setting.
5.
Press Button 1 to exit mode.
To customize your space to sales:
1.
Press Button 4 when “Space to Sales” is displayed.
2.
Press Button 2 or 3 to scroll until display reads “Space to Sales - Custom.”
3.
Press Button 4. Display reads “Clear Settings?”
4.
Press Button 4 to clear. Display reads “Custom Sel X - None.”
5.
Press Button 4 to change a selection assignment.
6.
Press Button 4 to assign (flashing) or unassigned (not flashing or steady) columns.
7.
Press Button 1. Display reads “Save?”
8.
Press Button 4 to save.
9.
Press Button 1 to exit the mode.
V21
12.4 Programming Coke Chameleon | P2-9
