V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230263
Please note: All modes except Diagnostics, Coin Payout, Tube Fill, Recycler Payout, Recycler
Fill, Test Mode are password protected.
Diagnostics:
Diagnostics Mode displays the error in the vendor to help diagnose the problem.
See inner door of vendor or Troubleshooting section for errors.
To view the detailed error
1.
Press Button 4 to enter into “Diagnostics” Mode
2.
If there are no errors the display will read “ Error None” otherwise the display will show the
top level error
3.
Press Button 4 to view the detailed error
4.
Press Button 2 or 3 to scroll to check for more errors
Refer to troubleshooting section for diagnosing the errors
5.
Press Button 1 to exit
To Clear the error
1.
Scroll to view the detailed error
2.
Press and hold Button 4 for 2 seconds – the error will clear.
3.
Press Button 1 to exit mode.
Coin Payout:
Coin Payout Mode allows the operator to ‘test’ for proper operation of the changer tubes.
1.
Press Button 4 to enter into “Coin Payout” mode
2.
Press Button 2 or 3 to scroll to desired denomination
3.
Press Button 4 to dispense displayed denomination
4.
Press Button 1 to exit mode
Tube Fill:
Allows you to fill the coin tubes via the external coin insert. This is the recommended way to fill
the coin tubes because the control board is able to keep an accurate count of the coins.
1.
Press Button 4 to enter into “Tube Fill” mode.
2.
Insert coins into coin insert slot and the controller will “count” the number of coins going
into the coin mechanism.
The Recycler Payout and the Recycler Fill Modes are displayed only if the vendor is connected
with a recycler unit compatible in a MDB 4.0. Please note the Recycler Mode is to check the bill
accepted and dispensed by the Bill Recycler and not the bills accepted by the Bill Validator.
Bill Validator can accept equal or more bill types than the recycler but cannot dispense any bills.
Recycler Payout:
Recycler Payout Mode allows the operator to test the dispense operation of the bill recycler unit.
This mode will only be displayed if the vendor is connected with a recycler unit in a MDB 4.0.
V21
12.4 Programming Coke Chameleon | P2-3
