16
S&C Instruction Sheet 1069-500
Connector Wiring—IntelliCom WAN Mesh Radio
Figure 6. IntelliCom WAN Mesh Radio ac connector.
Connector View
Cable-End View
Figure 7. IntelliCom WAN Mesh Radio dc connector.
Connector View
Cable-End View
Figure 6 shows the pin out of the ac power connector for an IntelliCom WAN Mesh Radio.
Views are shown for the connector on the unit, and the mating connector on the cable
itself. Pin 1 is neutral; pin 2 is line, and pin 3 is ground.
Figure 7 shows the pinout of the dc power connector for an IntelliCom WAN Mesh Radio.
Views are shown for the connector on the unit, and the mating connector on the cable
itself. Pin 4 is +12 Vdc, and pin 3 is ground.
Figure 8 shows the wiring diagram for the optional 6-pin power connector, Catalog
Number DC-1720. The connector is supplied without a cable. Standard power cable can
be used to make the required length.
NOTICE
For the IntelliCom WAN Mesh Radio to supply PoE-compliant 48 Vdc power to other
devices, it must be supplied 12 Vdc ±15%, at 3 amperes .
Figure 8. Wiring for catalog number DC-1720 dc connector.
Cable-End View
P
rint
ed in U
.S
.A
.
AC Power Connection
DC Power Connection
Custom DC Cable
