S&C Instruction Sheet 1069-500
7
Setup and Installation
Mounting the IntelliCom
WAN Mesh Radio
Your radio is supplied with a two-piece mounting bracket. To mount the radio, remove
the outer piece by loosening the thumb screws. The inner bracket can be left attached
to the radio, as shown in Figure 1.
You can mount the radio to a wall, a light pole, or an irregularly shaped pole. The universal
mounting bracket has been designed with multiple holes and slots to allow mounting with
U-bolts, straps, or other methods. Extra nuts and bolts are provided for this purpose;
don’t be concerned if you have leftover fasteners when installation is complete. See
Figure 2. Use four screws (not supplied) to attach the universal mounting bracket securely
to the wall using the four holes near the top and bottom of the bracket. Use appropriate
anchors when attaching to masonry or other materials.
Figure 1. IntelliCom WAN Mesh Radio universal mounting bracket.
Figure 2. Attaching the IntelliCom WAN Mesh Radio mounting bracket.
