Switch Control Configuration
Figure 5. The Setup>Validate/Apply screen.
Security is extremely important for the electric grid. Log-in and password information
should never be left set to default entries. To change them, navigate to the
Setup>Security
screen. See Figure 6. Configure the User Groups, create passwords for each group, and
select the access for each group with these checkboxes. Only users logged in as an Admin
can make changes to this screen. The User Group name can be changed for all groups
except Admin and Viewer. All passwords can be changed. Passwords have no restrictions
on characters, and the max character limit is 12. A dialog box will open when the value
to change is clicked on. Changes do not take effect until the
Apply
button is clicked on
in the
Setup>Validate/Apply
screen.
Security
Figure 6. The Setup>Security screen.
NOTICE
Lost Admin passwords cannot be recovered in the field . The control must be
returned to the factory for the default passwords to be reset .
10 S&C Instruction Sheet 1045-511
