S&C 5800 Series, Installation Manual

Page: 7 / 38

S&C Instruction Sheet 1042-511 7
Installation
Figure 1. Suggested team installation and setup procedure, Phase 1.
Team Installation/Setup
Phase 1
Assign each team member a unique
DNP/RTU address .
START
Go to Phase 2
(see next page)
Plan the layout of the sources,
switches, and the line sections
that will be part of the
IntelliTeam II system .
Plan the communication system
for peer-to-peer transmission
and for data interchange with
the SCADA master station,
if one is used .
Name the teams (16 characters
maximum) . Assign team number
designations: Team 1 to 8
as needed for the
Setup>
Team Configuration screens .
Inspect the received equipment for
damaged or missing parts .
Order necessary comm equipment .
Collect the information needed
to set up communication equipment
and team member software .