S&C 5800 Series, Installation Manual

Page: 18 / 38

18 S&C Instruction Sheet 1042-511
Installation
Figure 8. Side view of the switch control enclosure on the pole.
(b) Pad-mounted controls:
Mount the switch control chassis in the low-voltage compartment as follows:
1. Find the four studs on the wall of the low-voltage compartment.
2. Position the switch control so the four studs align with the four holes in the
mounting flanges. See Figure 9.
3. Hang the switch control on the studs.
4. Secure the switch control with lock washers and nuts.
Figure 9. Switch control chassis mounted in pad-mounted gear.