San Telequip (P) Ltd.,
504 & 505,Deron heights,Opp Mahabaleshwar hotel
Baner Road,Baner Pune 411 045
Phone : 020-, 65001587
Connecting. Converting. Leading !
email :
.
37
Gateway will communicate with BACnet IP devices using node IDs and object IDs of these
devices which are configured through CSV file downloaded in the gateway. After
configuration of the gateway, MIB file is generated through ruinet utility. This MIB file is loaded
into SNMP client software to establish connection with the gateway. After completion of above
setup, SNMP client station can communicate to the BACnet IP devices.
9 CONNECTION DETAILS
NAME
DETAILS
24 V AC/ DC (+,- and E)
Connect 24 V AC/DC supply.
Ethernet port/BACnet IP
Host / field protocol support
(BACnet IP in GW BMS 01, GW BMS 02, GW BMS 03, GW BMS
01-02, GW BMS 02-02R and SNMP in GWBMS05). & Also used
for diagnostics purpose.
D+ and D-
Connect D+ and D- of Field devices.
TX+,TX-,RX+ and RX-
(In case of 4 Wire device)
Connect TX+,TX-,RX+ and RX- wires of Field devices.(4 Wire
Device)
10 LED INDICATIONS
LED name
Meaning
POWER
Unit is powered on.
TX
Channel is transmitting data.
RX
Channel is receiving data.
10/100M
ON-100 Mbps (100Base Tx)
OFF-10Mbps
LINK/ACT
ON- Network Connected
OFF- No network connected
Blinking- Activity on the Ethernet port
_____________________________________________________________________________
