San Telequip (P) Ltd.,
504 & 505,Deron heights,Opp Mahabaleshwar hotel
Baner Road,Baner Pune 411 045
Phone : 020-, 65001587
Connecting. Converting. Leading !
email :
.
3
1 INTRODUCTION
BMS protocol gateway is a protocol translator between Serial-Serial, Serial-Ethernet devices
using MODBUS RTU, MODBUS TCP, BACnet MSTP, BACnet IP, SNMP, Metasys N2,
Lonworks protocol. Depending on the model, the gateway has one or two serial ports and one
Ethernet port. The Gateway needs to be configured as per engineering details of field
equipments to be connected to the gateway.
2 SPECIFICATIONS
Interfaces:
Serial Interface
SERIAL PORT: 1
RS-485, 2 Wire, 3 Pin Screw type
terminals.
RS-485, 4 Wire, 5 Pin Screw type
terminals. (For GW BMS 01 & GW BMS 02)
SERIAL PORT: 2 (Optional depending on the second Protocol selected)
RS-485, 2 Wire, 3 Pin Screw type terminals.
LAN
Ethernet : 10/100Mbps – Auto detecting
No. of Ports : 1 Port
Connector : RJ45
Power Requirements:
Power Input : 24V AC/DC, Range 18V to 30V
Connector : 3 Pin Screw Type
Environment
Oper
ating Temperature
: -40
C to 85
C
Relative Humidity : 5-90% RH, non-condensing
LED Indications
Indicator Light
State
Introduction
Power
ON
Gateway is Powered ON
OFF
Gateway is Powered OFF
TX
Blinking
Data Transmission
OFF
No Data Transmission
Rx
Blinking
Data Reception
OFF
No Data Reception
