San Telequip (P) Ltd.,
504 & 505,Deron heights,Opp Mahabaleshwar hotel
Baner Road,Baner Pune 411 045
Phone : 020-, 65001587
Connecting. Converting. Leading !
email :
.
24
NOTE: Some implementations of the Microsoft DHCP Client will not use an IP address lease
offered by the gateway until its previous lease has been released. The way to release and
renew a lease on a PC is to open a command prompt window and use the following
commands (syntax may be different on Windows other than XP):
ipconfig /release *
ipconfig /renew *
The gateway checks every few minutes for the existence of other DHCP Servers and will
disable itself if any are detected. A message on the Ruinet E screen will indicate when the
DHCP Server has been disabled
.
Also subnet netmask, DHCP settings and gateway settings can be changed in the above
settings.
4.16 Restart the gateway
Push the ! (Shift+1) key to restart the gateway. All stats and message screens will be cleared
and connections with remote devices closed. Ruinet will display the main interactive menu
again after the gateway has restarted.
A utility called ruinet.exe is required to download driver configuration file into the gateway. The
same utility is also used to change the IP address and configure other parameters of gateway.
Note:
If user has not provided the IP address to be assigned to the gateway, then gateway is
shipped with default IP address 192.168.1.200 and subnet mask 255.255.255.0 with DHCP
disabled. If user wants to change the IP address of the gateway, then procedure is mentioned
as below.
