Installation and Operation Manual
56
4-8 Alarms
Press and
then
Alarms:
A warning message with beep sound is displayed when an alarm condition is met by user
setting. Press
to clear the alarm. However, the alarm will be displayed again when the
alarm condition occurs again. The unit provides alarms for various functions.
4-8-1 Fish
Trigger an alarm when echo from the
transducer is matched to preprogrammed fish
profile.
4-8-2 Deep
Trigger an alarm when the depth value
received from the transducer is deeper than a
set value.
4-8-3 Shallow
Trigger an alarm when the depth value
received from the transducer is shallower
than a set value.
4-8-4 Temperature
Trigger an alarm when the reported
temperature from the transducer is same as
a set value.
4-8-5 Temperature rate
Trigger an alarm when the rate of
temperature change from the transducer is
same as a set value.
4-8-6 Low battery
Trigger an alarm when battery voltage is
lower than a set value.
4-8-7 Navigation alarms
Arrival radius :
Trigger an alarm when your
boat is approaching the destination to set
value
Anchor alarm :
Trigger an alarm when your
boat moves more than set valve
XTE :
Trigger an alarm when your boat
moves off the current CDI scale.
Danger :
Trigger an alarm when your boat is
getting closed to dangerous point.
4-8-8 AIS
See the Alarm option of 4-7 (AIS Settings).
4-8-9 DGPS
Trigger an alarm when DGPS signal is not
received.
4-8-10 Restore default
Returns every alarm settings to default.
Summary of Contents for N560
Page 1: ......
Page 2: ...Installation and Operation Manual 2...
