Installation and Operation Manual
64
5-8 Sonar Transducers
The transducer is a sensor that transmits and
receives sound waves into the water.
• Fit the sonar transducer supplied, following
the instructions in the Transducer
Installation Manual supplied with the chart
plotter.
• In case of installation of 50/200KH
transducer, water speed sensor and water
temperature sensor, an optional through
hull dual frequency sonar transducer and
through hull speed/temperature transducer
provide more enhanced performance.
Contact Samyung ENC for more
information.
• Connect the transducer to the chart plotter.
• At the system configuration window, set
Sonar to
and set up the sonar options
If you use Y-Cable, the chart plotter can
display water temperature and water speed
from the compatible devices and receive and
display the depth from transducer.
To connect these instruments, please connect
the cable to the unit as the below picture.
Y Cable
TEMP./SPEED
Transducer
Pin number
Detail
1
TD 1
2
Shield
3
4
5
TD 2
6
Shield
Pin number
Detail
1
Shield
2
Speed supply
3
GND (Shield)
4
TEMP.
5
6
Speed
7
8
Summary of Contents for N560
Page 1: ......
Page 2: ...Installation and Operation Manual 2...
