- 23 -
∙PgUp : Change the current channel to the next registered channel
∙PgDn : Change the current channel to the previous registered channel
[Sub Menu]
∙AGC : Automatically adjusts input signal gain. (Normally, set to 'Slow'.)
Fast - change RF gain fast corresponding to the received signal power
Slow - change RF gain slowly corresponding to the received signal power
Off - AGC function is off
∙Band width : Selects the reception bandwidth.
0.3k - Set to bandwidth '0.3KHz'.
3k - Set to bandwidth '3KHz'.
6k - Set to bandwidth '6KHz'.
∙Attenuator : Operating the attenuator. (Normally, set to 'off '.)
On - attenuating signals that are received from nearby stations or
distorted due to their strength
Off - Attenuator function off
∙Station Edit : register the frequency of stations
∙Station Print : print out the registered frequency of stations
5.3 Setting Transmit and Receiving Frequencies
* Frequencies are set by KHz
(1) Setting Transmitting frequencies
a) Press the [F7] key on the keyboard.
b) Input frequencies with the numerical keys.
* Use the right/left arrow keys to move the cursor.
c) Press the [ENT] key.
(Note!!) Keep frequencies between 1600KHz and 27500KHz.
(2) Setting Receiving frequencies
a) Press the [F8] key on the keyboard.
b) Input frequencies with the numerical keys.
* Use the right/left arrow keys to move the cursor.
c) Press the [ENT] key.
(Note!!) Keep frequencies between 90KHz and 29999.9KHz.
- 24 -
(3) Setting Transmit/Receive frequencies using 'COMM'.
a) Press the [F3] key on the keyboard to display the following screen.
b) Select the desired station with the arrow keys and press the [ENT] key. Then, information
of the selected station is shown as follows.
* Use the [CLR] key to return to the previous screen.
c) Move the cursor to desired channel and press the [ENT] key. Then, the initial screen of
TEL mode is shown and Transmit/Receive frequencies are set as registered channel.
* Use the [CLR] key to return to the previous screen.
(4) Setting Transmit/Receive frequencies using 'Channel'
a) Press [F6] key or '/' key on the keyboard or press '#' key on the front panel.
b) Enter ITU channel or user channel with the numerical keys.
c) Press the [ENT] key.