- 83 -
c) Press the [Esc] key, and the following initial screen of [CFEC] mode will display. Call the
station with the frequency of selected channel.
* Press the [F8] key during the calling to return to the initial screen of Telex mode
d) When the station is connected, the cursor appears in upper left of screen
(3) Communication on the FEC mode
* Follow the above (1) or (2) procedures then follow the next steps
a) When the station is connected with FEC mode, the initial screen of [FEC] mode display
and then you can communicate
b) Type the message to transmit using keyboard then press the [ENT] key
* Press the Back space to erase the left one letter(character) from the cursor. And the
message will not be transmitted until press the [ENT] key
a) Press function keys to use allocated function
b) Macro command edited can be transmitted using [F5] key.
(4) Usable keys on the FEC mode
- 84 -
* usable
characters
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890
-?( ). , ' =+abcdefghijklmnopqrstuvwxyz
*Back space
erase the left one character from the cursor
* Enter
transmit a line
*Left Shift+Space
change the language(English, Russian)
☞warning!!)can be change the language, when setting on the present language
to "Russion＂(attention to setting the using language 12.9)
* F2 : 'Hereis'
transmit one's own Answer back code
* F3 : 'TMS'
transmit the current time
* F4 : 'F. send' transmit the file edited on the Edit mode (see '(5) transmit a file')
* F5 : 'Macro'
transmit Macro Command
* F8 : 'Stop'
stop communication
(5) Transmitting a file
* Follow the above (1) procedure then the next steps
a) Press the [F4] key
b) Move the cursor to the desired file to transmit and press the [ENT] key
c) If contents of file appear on the screen, it will be transmitted
* Press the [F8] key to stop transmitting
(6) Transmitting a Macro Command
* Follow the above (1) procedure then the next steps
a) Press the [F5] key
b) Move the cursor to the desired command to transmit and press the [ENT] key
c) If contents of command appear on the screen, it will be transmitted
* Press the [F8] key to stop transmitting
7.9 Scanning the received signal
* Scanning on the receiving frequencies which registered with the tranmitting frequency of
other stations.
a) Press the [SCAN] key on the controller.
b) Move the cursor to the desired station with arrow keys.
c) Press [ENT] key.
d) The registered transmitting frequencies of the selected station is set to the scanning
frequency and such frequenies is scanned.
* To stop the scanning because of call or other cases, press [SCAN] key once more. Then,
the transmitting and receiving frquency is set to the final frequeny when scanning stop
automatically.
7.10 Registering stations and frequencies
a) Press [F9] key to call sub-menu.
b) Move the cursor to Station Edit with the up/down arrow keys and press the [ENT] key to
