- 21 -
5. SSB RADIO TELEPHONE (TEL) MODE
5.1 Selecting TEL Mode
(1) Selecting by [TEL] key
In communication mode on the controller, press the [TEL] key to select the [TEL] mode.
(2) Selecting by keyboard
a) Press the [F10] key on the keyboard to display main menu as follows.
b) Press the [F1] key to select the [TEL] mode. You can also select the [TEL] mode by the
following: Move the cursor to "F1 : SSB Telephone" with arrow keys and press [ENT]
key.
(3) Selecting by [MENU] key on the front panel
a) Press the [MENU] key on the front panel to display main menu is as above.
b) Move the cursor to "F1 : SSB Telephone" using the arrow keys and press [ENT] key.
- 22 -
5.2 Initial screen of TEL Mode
* Following the instructions in 5.1, you will find the initial screen of TEL mode as below.
[Screen]
∙CH : Calling channel and displays the current channel
∙TX : Setting the transmitting frequency
∙RX : Setting the receiving frequency
∙Indication Bar : Indicate the current RF Gain on the indication bar
∙RF gain : Adjust the RF gain
∙Clarify : Adjust the Clarification of received siganl
∙Fine Tune : Contrl the receiving signal slightly
∙Tx power : Setting the transmission power(when using AC power)
Full - 250W
Low - 100W
∙Mode : Setting the communication method
Simp - Simplex mode
Dup - Duplex mode
Tone - Alarm tone generation
[Function Keys]
∙F1 DIM : Adjust the dim of LCD backlight
∙F3 Comm. : Call the registered channel
∙F4 Scan : Scan the registered channels sequently
∙F5 Tuning : Tune the antenna
∙F6 CH : Set the channel
∙F7 TX : Set the transmision frequency
∙F8 RX : Set the receving frequency
∙F9 Sub : Display sub-menu
∙F10 Menu : Display main menu