- 79 -
7.7 [ARQ] mode
(1) Connect to a station with ARQ mode
* connect with current channel
a) Press [F2] key on the keyboard, then following screen displays and connet to station with
ARQ mode with currnet channel.
* connect with specific station
a) Press [F9] key to call sub-menu.
b) Move the cursor to [ARQ] using up/down arrow keys and press the [ENT] key. The
following screen will appear
c) Select the desired station using arrow keys and press [ENT] key to display the following
screen
* Use the [CLR] key to return to the previous screen.
d) Select the desired channel using arrow keys and press the [ENT] key
- 80 -
e) Then, the initial screen of [ARQ] mode displays as below. Call up the station with the
frequency of selected channel
* Press [F8] key during the calling to return to the initial screen of Telex mode
f) When the station is connected, the cursor appears in the upper left of screen
(2) Communication with the ARQ mode
* Follow the above (1) procedure then the next steps
a) When a station is connected with ARQ mode, the above screen appears. At this point you can
communicate
b) Type the message to transmit using keyboard and then press the [ENT] key
* Press the Back space to erase one letter(character) to the left of the cursor. The message
will not be transmitted until the [ENT] key is pressed.
c) Use appropriate key with functional key
d) Can transmit Macro Command using 【F5】
(3) Usable keys on the ARQ mode
*usable characters
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890
-?( ), . ' =/+abcdefghijklmnopqrstuvwzyz
* Back space
erase one character to the left of the cursor
* Enter
transmit one line
* Left Shift+Space
change the language(English, Russian)
☞warning!!)can be change the language, when setting on the present language
to "Russion＂(attention to setting the using language 12.9)
* F1 : 'WHO'
request for a station's Answer back code
* F2 : 'Hereis'
transmit one's country's Answer back code
* F3 : 'TMS'
transmit the current time
* F4 : 'F. send' transmit a file edited in Edit mode ( see '(4) transmit a file')
* F6 : 'POLL'
* F7 : 'Over'
switchover the message transmit direction
* F8 : 'Stop'
stop communication
* F9 : 'Func'
set the items (e.g. receiving frequency) which related to receiving at the first stage
of Telex menu
(4) Transmitting a file
* Follow the above (1) procedure then the next steps
