- 39 -
(6) Setting Bandwidth
a) Press [F9] key to call sub-menu.
b) Move the cursor to Band width with the up/down arrow keys and press [ENT] key.
c) Use the right/left arrow keys to select a desired Bandwidth.
d) Press [ENT] key.
(7) Setting Attenuator
a) Press [F9] key to call sub-menu.
b) Move the cursor to Attenuator with the up/down arrow keys and press [ENT] key.
c) Use the right/left arrow keys to select a desired mode.
On - for signals that are received from nearby stations or are distorted due to their
strength
Off - for normal signals.
d) Press [ENT] key.
(8) Adjusting speaker volume
a) Adjust the volume using [Vol ▲ ] and [Vol ▼ ] on the controller.
b) Press [SP
] key and the speaker is off
* The Receiver is on even though the speaker is off.
- 40 -
6.7 Distress Call
(1) Set up distress call
a) Follow procedure 6.1 to display the DSC intial screen
b) Press [F9] key to call sub-menu.
c) Move the cursor to the 'Distress msg edit' using up/down arrow keys.
d) Press [ENT] key to display the following screen.
e) Move the cursor to the desired file using up/down arrow keys.
f) Press [ENT] key to display the following screen
∙FORMAT : show the format(type) of calls
Distress - format is Distress call (fixed)
∙NATURE : set the type of distress
Undesignated (Distress from carelessness) Fire, Flood, Collision,
Ground(strand), List(tilt), Sink, Adrift, Abandon(give up the vessel),
EPIRB
∙POSITION : set up the distress position
Nxx.xx - north latitude (00.00 ～ 90.00)
Sxx.xx - south latitude (00.00 ～ 90.00)
Exxx.xx - east longitude (000.00 ～ 180.00)
