Problems
Solutions
Vacuum cleaner stops
operation during
cleaning.
• As this product has the overheating prevention device of the
motor, product will stop operation temporarily for the following
conditions.
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
Static electricity occurs
when cleaning a thick
and soft mat.
• Materials of a mat (childcare center mat, noise prevention mat for
between floors, etc.) may cause the static electricity.
– Move the brush on a normal floor for a while and clean again,
then the static electricity should disappear.
• This Vacuum cleaner is approved the following.
– The Low Voltage Directive 2014/35/EU
– The EMC Directive 2014/30/EU
Product Specification
Model
VS20T75****
VS15T70****
Power
100-240 V~ 50-60 Hz
Rated power
consumption
550 W
410 W
Battery
specification
Lithium-ion 21.9 V, 2850 mAh, 6 cell Lithium-ion 21.6 V, 1800 mAh, 6 cell
Charging time
3.5 hours
Cleaning
time
Handy
Approximately 6 minutes (MAX) /
Approximately 30 minutes (MID) /
Approximately 60 minutes (MIN)
Approximately 5 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 40 minutes (MIN)
Soft
Action
Brush
Approximately 9 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 40 minutes (MIN)
Approximately 6 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 30 minutes (MIN)
Turbo
Action
Brush
Approximately 9 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 35 minutes (MIN)
Approximately 5 minutes (MAX) /
Approximately 18 minutes (MID) /
Approximately 27 minutes (MIN)
❇
❇
Charging and cleaning time may differ depending on the brushes and the conditions of use.
English
14
VS7000_13ge_00837D-02_GE.indb 14
2020-09-10 오후 11:32:59
