• Use a genuine wet pad of Samsung
Electronics for wet brush.
• If the wet brush is used without a
wet pad, any product malfunction
will not be covered by warranty
and a service fee will be charged.
• When you purchase an additional
multi-use wet pad for the wet
brush, contact a Samsung service
center.
• When you purchase an additional
single-use wet pad, check the
model name VCA-SPA90.
CAUTION
• When the spinning brush (drum)
inside a brush is working, do not
touch the brush.
– Otherwise, your hand can be
caught and it may cause an injury.
• Before using the wet brush, detach
the wet pad and put some water on
it, then reattach it to the spin disk.
• Do not use the vacuum cleaner on
items that can be scratched (TV
and monitor screens, etc.)
Maintenance
NOTE
• Sometimes the wheel of a brush
can scratch the floor. Before using
the vacuum cleaner, check the
status of the wheels of the brush.
– If there is foreign matter on the
wheel of the brush which cannot
be removed easily, contact a
Samsung service center.
• If the inner part of the wet brush
is clogged with a large foreign
matter, spinning speed decreases
or stops.
CAUTION
• Storing the vacuum cleaner in
sunlight for long hours may cause
parts of the vacuum to deform or
discolor. Therefore, after cleaning
the parts of the vacuum cleaner,
dry them in the shade.
• Do not clean the brush of the
vacuum cleaner with water.
Cleaning it with water can cause
the brush to deform or discolor.
• Before cleaning the wall mount,
you must unplug the wall mount.
• If you notice a continuous
reduction in suction or the vacuum
cleaner overheats abnormally,
replace the ultra fine dust filter.
• After cleaning <a dustbin>, <a
metal mesh grille filter>, or <a
washable micro filter> with water,
dry in the shade.
– When heat is applied, product
malformation may occur.
English
12
VS7000_13ge_00837D-02_GE.indb 12
2020-09-10 오후 11:32:59
