After confirming whether foreign material is existed or not,
separate it by pressing the cover fixing hook.
Separate the dust bin by pressing the dust bin
discharging (PUSH) button.
Lift the power brush up from the main frame.
Remove foreign materials such as hair or thread clung
to the power brush with the cleaning brush or vacuum
cleaner.
When the handling is over, accurately fix the power brush
in the emergency switch direction, and then, secure the
opposite side with the same method.
If side rotating brush becomes bent
or dirty, take the following measures.
36
When suction force of the robotic vacuum cleaner is weakened or trembling
noise is generated, the cleaner may have been blocked by foreign material.
When being blocked by
foreign material, remove it as follows.
■
Handling method of power brush
Always turn off the emergency switch at the bottom
of main frame before handling.
2
3
4
5
●
In order to prevent the blocking by foreign material, be careful not
to let the cleaner inhale toothpick, cotton-swabstick and so forth
during the cleaning.
●
If removing of foreign material is difficult, call to the customer care center
●
As the power brush performs the cleaning by sweeping up the dust of the floor,
foreign materials such as thin and long thread, hair and so forth can be wound
on it, therefore, perform the cleaning through regular confirmation.
As the dust on the dust bin can be spilt, separate the
dust bin before handling the power brush.
After insert the upper section of the cover into the groove
(3 points), perform the assembling by lowering it
downward until “click” sound is generated.
6
1
Handling of r
obotic vacuum
cleaner
installation
DJ68-00517A-고급형(EN).indd 36
2010.5.6 1:33:48 PM
