Installation
of
robotic
vacuum
cleaner
소
소
소
소
소
소
installation
21
Get to know about
installation method.
■
Installation of entry prevention tape (Exclusive use for VCRA84V* SERIES)
Always attach entry prevention tape at no-entry area of
the robot vacuum cleaner.
■Remove the vinyl tape before attaching it.
✽ Entry prevention tape is to be sold separately, therefore,
purchase them at customer care center, if required.
1
Attach the entry prevention tape at the area which has
less than 5 cm of height difference with the floor.
Examples) Veranda, rest room, low stairway, entrance
door of porch etc.
2
3
Attach the entry prevention tape at 5 cm in front of the
places such as the fireplace, heater, heat of fire,
hazardous area, and the area with moisture etc.
Attach the entry prevention tape in front of the room with the
threshold of more than 1 cm. (attached to the living room)
▶
Only the threshold of less than 1 cm can be
crossed, and if it is exceeding 1 cm, the robotic
vacuum cleaner can be caught at the threshold.
4
Attach the entry prevention tape at the handrail or
entrance of stairway et cetera with falling danger.
▶
If dust is accumulated on the falling prevention sensor
window, falling can be happened as the robotic vacuum
cleaner does not recognize the falling danger area.
▶ If being fallen, injury or damage to the product can be
happened.
Attach the entry prevention tape as it is without cutting.
Entry can be happened as the robotic vacuum cleaner may not
recognize it otherwise.
● Detour can be conducted through detecting by the falling
prevention sensor as falling danger area of the zone with more than
5 cm difference with the floor, however, for the area with less than
that height difference, entry will be conducted as it is not to be
recognized as the falling danger area.
● The entry prevention tape can be purchased from the customer
care center
DJ68-00517A-고급형(EN).indd 21
2010.5.6 1:32:53 PM
