17
Before inserting the power supply plug of the charger, conform
to the following sequence.
Get to know about the
installation method.
Installation of r
obotic vacuum
cleaner
installation
For charger, always maintain the inserted state
of its power supply plug.
●
If power is not supplied to the
charger, automatic charging can
not be accomplished because
robotic vacuum cleaner can not
detect the charger.
●
In the case when robotic vacuum cleaner is being separated from
the charger, natural discharging will be taken place.
■
Installation of charger
2
3
4
5
1
Power supply
lamp
Charging lamp
Install the charger at the location which can easily
detected by the robot vacuum cleaner.
Evenly arrange the power supply cord along the wall
surface.
Install the charger at the location where the floor and wall
are even.
Install the charger at the location where there are no
obstacles around approx. 1m in front of and 0.5 m to the
left and right side of the charger.
In the case when the floor material is comprised of
lumber material, it is desirable to make the charger facing
in the grain direction of wood.
DJ68-00517A-고급형(EN).indd 17
2010.5.6 1:32:36 PM
