26
Get to know about
operation method.
Automatic cleaning
■
Using of automatic cleaning
Automatic cleaning will be conducted while moving by itself
until 1 cycle of the cleaning is completed.
■ When starting the cleaning from the attached state to the charger,
the movement is performed while the starting point is being
remembered, therefore, the charging return time will be shortened.
■ When the battery is not sufficient during the cleaning, the cleaning
will be started again by moving to the remaining area after the
charging. (the number of re-cleaning times: 1 time)
Under cleaning
Completion of
cleaning
Canceling of
setup
2
1
Setting of mode
Main frame button
Remote controller
Sequence of setting
1time
3time
4time
2 time
▶
Get to know about re-cleaning function
●
When being recognized that the cleaning completed,
re-cleaning will not be performed.
●
If arbitrarily moving the robotic vacuum cleaner or
manipulating the button while it is under automatic
charging, re-cleaning will not be performed since these
are being recognized as the completion of the cleaning.
Do not conduct arbitrary moving or manipulating the
button of the robotic vacuum cleaner which is in the
cleaning operation. Since these are being recognized
as the completion of the cleaning, the cleaning
operation will be started from the beginning.
Using of r
obotic vacuum
cleaner
use
DJ68-00517A-고급형(EN).indd 26
2010.5.6 1:33:12 PM
