Samsung UD46E-A User Manual Download

Page: 50 / 94

Screen Position

To rearrange split screens, adjust the number for each product in the matrix using the

Screen Position

feature.

Selecting

Screen Position

will display the videowall matrix with the numbers assigned to the products that form the videowall.

To change the order of a display device, change the device number and press the

button.

―

A maximum of 255 displays can be arranged in

Screen Position

―

The

Screen Position

option is only enabled when

Video Wall

is set to

―

To use the function, make sure

Horizontal x Vertical

is configured.

Format

Select how to display images on the videowall display.

•

Full

: Display images in full screen.

•

Natural

: Display images in the original aspect ratio.

―

The

Format

option is only enabled when

Video Wall

is set to

―

When using

Video Wall

mode, a resolution of 1280x720P, 1920x1080P or 3840x2160P is recommended.

Summary of Contents for UD46E-A































































































Search results

Summary of Contents for UD46E-A

Reviews:

Related manuals for UD46E-A

Brands by name

Popular brands

Samsung UD46E-A, User Manual

Search results

Summary of Contents for UD46E-A

Reviews:

Related manuals for UD46E-A

Brands by name

Popular brands