background image

45

Using MDC

After you press the 

On

 button following the 

Off

 button, the product checks its status for about a 

minute. To run a command, try it after a minute.

MDC Program Installation/Uninstallation

Installation

 

MDC installation can be affected by the graphics card, mother board and network conditions.

Click the 

MDC Unified

 installation program.

Select a language for installation. Next, click "

OK

".

When the "

Welcome to the InstallShield Wizard for MDC_Unified

" screen appears, click "

Next

".

In the "

License Agreement

" window displayed, select "

I accept the terms in the license 

agreement

" and click "

Next

".

In the displayed "

Customer Information

" window, fill out all the information fields and click "

Next

".

In the displayed "

Destination Folder

" window, select the directory path you want to install the 

program in and click "

Next

".

 

If the directory path is not specified, the program will be installed in the default directory path.

In the displayed "

Ready to Install the Program

" window, check the directory path to install the 

program in and click "

Install

".

Installation progress will be displayed.

Click "

Finish

" in the displayed "

InstallShield Wizard Complete

" window.

 

Select "

Launch MDC Unified

" and click "

Finish

" to run the MDC program immediately.

10 

The 

MDC Unified

 shortcut icon will be created on the desktop after installation.

 

The MDC execution icon may not be displayed depending on the PC system or product 

specifications.

 

Press F5 if the execution icon is not displayed.

Uninstallation

Select 

Settings

 > 

Control Panel

 on the 

Start

 menu and double-click 

Add/Delete Program

.

Select 

MDC Unified

 from the list and click 

Change/Remove

.

Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website.

Chapter  04

Summary of Contents for UD46E-A































































































Reviews: