68
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
―
The
Primary Source Recovery
function is disabled if
Primary Source
is set to
All
.
Primary Source
Specify
Primary Source
for the automatic input source.
Secondary Source
Specify
Secondary Source
for the automatic input source.
Power Control
MENU
m
→
System
→
Power Control
→
ENTER
E
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is
not needed.
•
Off
/
On
PC Module Power
The PC module can be turned on/off separately from the LFD.
Synced Power-On
To turn off the LFD without turning off the PC module, select
Off
.
•
Off
/
On
Synced Power-Off
To turn on the PC module without turning on the LFD, select
Off
.
•
Off
/
On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message
No Signal
will appear if no source device is connected.
•
Off
The message
No Signal
will appear if no input signals are detected.
―
If
No Signal
is displayed although a source device is connected, check the cable connection.
―
If
No Signal Message
is set to
Off
, the
No Signal
message does not appear.
If this is the case, set
No Signal Message
to
On
.
•
On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
•
Off
/
On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
Power On Only
: Set the power button to turn on the power.
•
Power On/Off
: Set the power button to turn on/off the power.
