Samsung UD46E-A User Manual Download

Page: 63 / 94

OnScreen Display

Picture

OnScreen Display

System

Sound

Support

Display Orientation
Screen Protection
Message Display
Menu Language
Reset OnScreen Display

English

OnScreen Display

Current Temperature

The displayed image may differ depending on the model.

Display Orientation

MENU

→

OnScreen Display

→

Display Orientation

→

ENTER

Onscreen Menu Orientation

Set the menu screen orientation.

•

Landscape

: Display the menu in landscape mode (default).

•

Portrait

: Display the menu in portrait mode on the right side of the product screen.

Source Content Orientation

Set the orientation of content from external devices connected to the product.

•

Landscape

: Display the screen in landscape mode (default).

•

Portrait

: Display the screen in portrait mode.

―

Portrait

orientation mode is not supported when a UHD resolution is in use.

Aspect Ratio

Set the rotated screen to be either full screen or original.

•

Full Screen

: Display the rotated screen in full screen.

•

Original

: Display the rotated screen in the original aspect ratio.

―

Available only when

Source Content Orientation

is set to

Portrait

Chapter 07

Summary of Contents for UD46E-A































































































Search results

Summary of Contents for UD46E-A

Reviews:

Related manuals for UD46E-A

Brands by name

Popular brands

Samsung UD46E-A, User Manual

Search results

Summary of Contents for UD46E-A

Reviews:

Related manuals for UD46E-A

Brands by name

Popular brands