background image

64

Screen Protection

MENU

 m 

 

OnScreen Display

 

 

Screen Protection

 

 

ENTER 

E

To reduce the possibility of screen burn, this unit is equipped with 

Pixel Shift

 screen burn prevention 

technology.

Pixel Shift

 moves the picture slightly on the screen.

The 

Pixel Shift

 time setting allows you to program the time between movements of the picture in 

minutes.

Pixel Shift

Minimize image retention by finely moving pixels horizontally or vertically.

 

Pixel Shift

 (

Off

 / 

On

)

 

Horizontal

Vertical

 and 

Time

 are enabled only when 

Pixel Shift

 is set to 

On

.

 

Horizontal

: Sets how many pixels the screen moves horizontally.

 

Vertical

: Sets how many pixels the screen moves vertically.

 

Time

: Set the time interval for performing the horizontal or vertical movement, respectively.

Available Pixel Shift Settings and Optimum Settings.

Available Settings

Optimum Settings

Horizontal 

(pixels)

0

 ~ 

4

4

Vertical 

(pixels)

0

 ~ 

4

4

Time

 (minute)

1 min.

 ~ 

4 min.

4 min.

 

The 

Pixel Shift

 value may differ depending on the product size (inches) and mode.

 

Displaying a still image or a 

4:3

 output for an extended period of time may cause image retention. 

This is not a defect in the product.

Timer

You can set the timer for 

Screen Protection

.

The 

Screen Protection 

feature stops automatically after a specified period of time.

 

Timer 

(

Off

 / 

Repeat

 / 

Interval

)

 

-

Off

 

-

Repeat

: Display the anti-burn in pattern at a specified interval.

 

-

Interval

: Display the anti-burn in pattern for a specified period of time (from the starting to 

finishing time).

 

When 

Clock Set

 is configured, 

Interval

 will be enabled.

 

Period

Start Time

 and 

End Time

 are enabled only when 

Timer

 is set to 

Repeat

 or 

Interval

.

 

Period

: Specify the time interval to activate the 

Screen Protection

 function.

 

The option is enabled when 

Repeat

 is selected for 

Timer

.

 

Start Time

: Set the start time to activate the screen protection function.

 

The option is enabled when 

Interval

 is selected for 

Timer

.

 

End Time

: Set the end time to deactivate the screen protection function.

 

The option is enabled when 

Interval

 is selected for 

Timer

.

Immediate Display

Select the screen saver you want to display immediately.

 

Off

 / 

Fading Screen

Side Gray

When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the 
screen.

 

Off

 / 

Light

 / 

Dark

Summary of Contents for UD46E-A































































































Reviews: