manualshive.com logo in svg

Samsung Ubigate iBG2006, Installation Manual

Share
Download
Samsung Ubigate iBG2006 Installation Manual Download Page 13

 

Ubigate iBG2006 Installation Manual/Ed.01 

© SAMSUNG Electronics Co., Ltd.

 

XI

 

Conventions 

The following types of paragraphs contain special information that must be 
carefully read and thoroughly understood. Such information may or may not 
be enclosed in a rectangular box, separating it from the main text, but is 
always preceded by an icon and/or a bold title. 
 

 

WARNING 

 

Provides information or instructions that the reader should follow in 
order to avoid personal injury or fatality. 

 

 

CAUTION 

 

Provides information or instructions that the reader should follow in 
order to avoid a service failure or damage to the system. 

 

 NOTE 

 

Indicates additional information as a reference. 

 
 

Information for Product and Technical Support 

For questions regarding the product and technical supports: 
 
http://www.samsungnetwork.com 
 
 

Revision History 

EDITION 

DATE OF ISSUE 

REMARKS 

00 

07. 2007. 

First edition 

01 

05. 2008. 

Add ATOP-1 and ATOI-1 mini modules 

 

Summary of Contents for Ubigate iBG2006











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands