33
English
Using the Time Shift function
If you missed a live broadcast, you can see from the recorded broadcast using this feature.
When
Time Shift
is set to
Auto
, the TV stores the channel you watch currently to record automatically.
When
Time Shift
is set to
Manual
, if you press the
�
(Play) button, the TV stores the channel from the point of view you
want to record.
✎
If you press the
ENTER
E
button (
Chaptering
) during playing the file, you can search scene divided chapters you
want.
✎
If you press the
▲
or
▼
button, you can see the current channel being on air, or can see the start point the recorded
broadcast.
✎
NOTE
x
Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs, nor can
they be played when the main board of the TV is changed.
x
Data broadcasts cannot be recorded.
x
The availability of both recording and the
Timeshift
function may differ depending on picture quality and the free
space on the hard disk drive.
x
If you press the
▲
or
▼
button, you can see the current channel being on air, or can see the start point the recorded
broadcast.
x
The
Timeshift
operates for a maximum of 90 minutes.
x
After the
Timeshift
function has run for the maximum time, the time information will be fixed to “00:00:00.” Note that
if you have paused the recording the TV will automatically resume playback.
x
If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed.
x
When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the PVR function takes precedence.
x
During a playback or the
Timeshift
, the picture will be displayed according to the display settings of the TV.
x
If you change the input source during recording, the screen will go blank until the change is completed.
x
An application which supports neither the recording nor the
Timeshift
function will close automatically if you try to
use it during either function.
x
A message may appear in front of the application window indicating that the recording or the
Timeshift
function is
closed.
x
Timeshift
function is not supported for radio channels.
x
The recording and the
Timeshift
functions are disabled for channels locked with
Child Lock
.
x
If the USB device has failed the
Device Performance Test
, the USB device must go through the
Device Format
and
Device Performance Test
again before you record with the
Guide
or
Channel Manager
.
x
The recording and
Timeshift
functions can only be used with a USB storage device that completed the
Device
Performance Test
.
x
If you attempt the recording or
Timeshift
function with a device that did not have the
Device Performance Test
, the
function will not start.
x
PVR and Time Shift function need the USB device with high speed otherwise these function may not work.
x
When you are using the PVR and Time Shift function, your USB write and read speed will affect your watching effect.
x
When you are doing (REW) or(FF) operation during PVR and Time Shift function, the TV will read and write with USB
device at the same time which may cause the video block. Please change the usb device with higher speed.
x
If you press (REC) on the remote control while the
Channel Manager
screen is being displayed or record with
Timer
Recording
, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to
process the command.
x
If a USB device dedicated to recording is connected, existing
Timeshift
or recording files that were saved abnormally
will automatically be deleted.
x
If you switch to external input mode during recording, the recording will continue but the (REC) button will be
disabled.
x
If any function that turns off the TV (
Sleep Timer
, Off timer, etc.) is set for a time that conflicts with recording, the TV
will be turned off once the recording is complete.
x
The PVR will turn off when you are changing the channel setup(such as change the Air/Cable setting,channel up/
down or etc.)
