Samsung SVR-470, User Manual

Page: 9 / 84

1.1. Warning Symbols
™
Disassembly and Cleaning
9 There is a risk of malfunction, shock, and other dangers. Do not disassemble or
attempt to fix or alter the product yourself.
9 Do not clean the product with water, paint thinner, or other organic solvent as doing
so may cause product malfunctions and/or electric shock. When cleaning the product,
use a dry cloth to wipe the exterior of the device
.
Caution
Misuse or wrongful operation of the item may result in injury or damage to the item.
It indicates caution should be observed when operating.
™
Installing the Product
9 When installing the product, please leave at least 15cm of space between the cooling
vent and the wall for proper heat dissipation.
9 To prevent user injury and product damage, please install the product on a level
surface with no risk of the product falling.
9 Avoid installation in an environment where the product will be exposed to heat or
direct sunlight; product deformation and/or damage may result.
9 Installing a camera while recording is in progress may corrupt the recorded picture in
other channel(s). To avoid decreasing video quality, please only record after
installation of a new camera is complete.
™
Using the Product
9 Avoid shock and vibration while operating or moving the item.
9 Do not move the product while it is in operation; do not expose the product to strong
impact or throw the product.
9 Before adding HDDs from a third party, please contact your sales agent and avoid a
possible malfunction.
9
Damage to the product that is consequential to using a non-recommended hard disk
voids your product warranty.
9 This product is not an anti-theft or fire-prevention device; the manufacturer is not
responsible for any damage to property or personnel that may occur.
9 We recommend the installation of an uninterrupted power supply for all storage
devices.
8