Digital Video Recorder SVR-1670
36
Digital Video Recorder SVR-1670
37
To detach a hard disk drive, follow the instructions below:
1. Unplug the SATA and power cables. Remove the screws that connect the SVR-1670 main unit
and the hard disk drive bracket.
2. Lift up the loose hard disk bracket.
3. Remove fi xture screws on the both sides of the hard disk and the bracket. Store the removed
fi xture screws safely, so you can use them to connect a hard disk again later.
4. Push the hard disk drive out from the bracket.
Removing a Hard Disk Drive
Figure 3.6.9 Removing Screws that Connect the SVR-1670 and Hard Disk Drive Bracket
A
A
D
B
C
C
B
D
Figure 3.6.10 Lifting Hard Disk Drive Bracket from the SVR-1670
Chapter 3. Hardware Installation
Now, it is time to confi gure and disable the hard drive from the system.
Figure 3.6.11 Removing Hard Disk Drive
Disabling a Hard Disk Drive
To disable the removed hard disk drive, you must change its availability to " X " on the SVR-
1670’s Disk Manager menu.
1. From the OSD, select the System Settings menu.
2. Select the Disk submenu, and then, on it, select Disk Manager.
3. Select the removed hard disk drive, and then press ESC to exit the menu. Select Remove, and
then press Enter.
4. At the confi rmation message, select “Yes” to remove the hard disk drive from the list.
Figure 3.6.12 Disk Manager Menu Showing Disabled Hard Disk Drive