Digital Video Recorder SVR-1670
62
Digital Video Recorder SVR-1670
63
Chapter 7. Communication To/From the DVR
7. 3. Setting up for NTP Synchronization
Network Time Protocol (NTP) synchronizes time between devices on network. On a network, a server
provides the base time. The client systems receive the time from that server for synchronization.
Set the options to your preferred settings to confi gure NTP :
Figure 7.3.1 NTP submenu on the Network Setup Menu
Option Setting
Sync With NTP
Turns NTP on or off.
NYP Mode
The NTP mode indicates the client.
NTP Server
Location
Determines whether the NTP server is on a local network or on the Internet. This
option is only available if NTP Mode is set to Client.
NTP Local Server
IP
Sets the IP of the NTP server. Enter either the IP of an NTP server on the local
network or the IP of a DVR with its NTP mode set to Server.
This option is only available if the NTP Server Location is set to Local.
Interval
Set the synchronization interval; how often you want your system to communicate
with the server to synchronize the devices.
Option Setting
Remote Keyboard
ID
Designation the keyboard operating all DVR functions with the controller buttons.
The default value is 1.
NOTE: If one keyboard is connected to several DVRs, it might confl ict with other
channels, so a different value should be set for the keyboard address.
Remote Controller
ID
You can control up to 16 DVRs from one remote control by creating unique IDs for
each DVR.
Remote
Confi guration
Setup
Enable or Disable confi guration to system management software.
Remote Relay
Use the system management software to enable or disable the relay controls.
Serial Port
Four serial ports are available for the DVR; two RS-232C ports and two RS-485
ports.
PTZ
Setting up PTZ options.
The SVR-1670 can be controlled remotely by various devices.
Figure 7.4.1 Remote Control submenu on the Network Setup Menu
7. 4. Confi guring Remote Control