Digital Video Recorder SVR-1670
44
Digital Video Recorder SVR-1670
45
This chapter explains the Quick Setup menu, from which you can set the recording mode and the
system date and time. You can also turn on event checking and audio, and select the language
for the system to use.
This chapter information is presented in the following sections:
Ķ
5.1 Working on the Quick Setup Menu
Ķ
5.2 Setting the Record Mode
Ķ
5.3 Setting the Date and Time
You access the Quick Setup menu by clicking the Quick Setup tab on the OSD. This section
explains its options and settings.
5. 1. Working on the Quick Setup Menu
Figure 5.1.1 Quick Setup Menu
Option Settings
Record Mode
Specify how you want to record: by Schedule & Event, or Manual & Event.
Program
Enables to select a recording program when the Manual & Event mode is set to
Recording.
Disables the Program option when the Schedule & Event mode is set to Recording.
Event Check
When you want the system to check for events: Always, according to the Schedule
you selected, or Off (no checking performed).
Language
The language you want to display on menus and screens.
Time
Set the date and time by which the system is to run, record and timestamp data.
Record Audio
Set to On or Off.
Chapter 5. Quick Setup
Select the
Program, A-Z
This section provides a brief discussion about the record mode settings of Schedule & Event and
Manual & Event
Manual & Event
Schedule & Event
You can confi gure the product to start recording when the REC button on the front panel is
pressed, or when a preset event occurs.
If you set Manual & Event for the Record Mode, you must also select a Program from the
Program option. Settings run from Program A through Program Z.
To review or edit the defi nition of a program, move to the Record Setup menu in OSD, and then
select a submenu program.
After you’ve selected Manual & Event and its program, press the REC button on the DVR’s front
panel to begin the recording. The Rec light will glow red during recording.
While recording, an initial M displays on the upper right side of the screen, indicating the Manual
recording mode.
You can confi gure the product to start recording on a scheduled date or when a preset event
occurs. If you select Schedule & Event, you need to setup the schedule.
1. From the Schedule option, access the Schedule submenu. This menu is in a calendar format
showing each day of the week and 24 hours with each day.
2. On this Schedule, select which Program to run on any given day, or hours of that day.
Here is an example showing Program A entered as the program to run on Mondays and on
Tuesdays from Midnight until Noon.
Figure 5.2.1 Schedule Submenu from Quick Setup
5. 2. Setting the Record Mode