11
10
Remote Controller
Focus F/N button
Used to focus the image displayed on the
video presenter manally
AF button
Used to focus the image displayed on the
video presenter automatically
Reverse button
Used to put the image into reverse up/down
or right/left
Freeze button
Used to freeze the image on the screen
SHARP + button
Used to see the image sharper
SHARP - button
Used to see the image duller
/- button
Used to increase or decrease the
volume of microphone
AWC button
Used to adjust the screen color (white
balance) automatically
RED+/-button and BLUE +/-button
Used to increase the red or blue color
factor
INT/EXT button
Used to select internal Image or external Image
Internal (INT): To see the image on this presenter
External (EXT): To see the image sent from another AV
equipment through monitor (if connected to this
presenter)
POSI/NEGA button
Positive (POSI): To see the general state or positive film
Negative (NEGA): To see the negative film
Lamp button
Used to turn the head lamp on and off
WIDE button
Used to reduce the image size of an object
TELE button
Used to enlarge the image size of an object
button
Used to make the screen brighter
BRIGHT - button
Used to make the screen darker
Preset button
Used to save the current status (Zoom,
Focus, Lamp, Color etc).
When you use the video presenter on
another place, you need not to repeat
the same procedures but the saved
status will be automatically set only
by pressing the “Active” button.
Select the button (1~4) and press it
within 4 seconds after pressing
“Save/Active” button.
NAME AND FUNCTION
OF PART
Power button
Used to turn power on
and off
1
2
1
2
1
2
1
2
POWER IN
S-VIDEO OUT
DC12V IN
VIDEO
AUDIO
IN
IN
OUT
OUT
1
2
1
2
1
2
1
2
POWER IN
S-VIDEO OUT
DC12V IN
VIDEO
AUDIO
IN
IN
OUT
OUT
CONNECTION
Use the white plug to connect audio
terminal, and the yellow (or red) plug
to connect video terminal.
To TV or Monitor
You may use either 'Video OUT 1' or 'Video OUT 2' jack.
Connect 'S-video OUT' terminal when you have a TV with S-Video terminal. If 'S-Video OUT' terminal is
used, you can get more clear image, but the signal from external AV source will not be available.
Connect 'RF output terminal' to TV with only RF terminal.
To TV or Monitor and External AV Device
TV, Monitor,
LCD Projector
to video input terminal
Video Presenter
Yellow
AV Device (VTR, Camcorder)
White
Yellow
White
Yellow
TV, Monitor,
LCD Projector
Video Presenter
to video
input
terminal
to video
output
terminal
to audio
input
terminal
to audio
output
terminal
