maintenance
_13
03 MAINTENANCE
Maintenance
MINI TURBO BRUSH
Brushbar Replacement
Remove the tool from the hose, and turn upside down.
1.
Slide the switch to unlock position and remove bottom
plate.
Unscrew the one screw and remove belt guard.
2.
Remove brushbar including end plates and discard.
3.
Inspect belt to ensure that it is in good condition. If broken
4.
or cracked, please replace. (See below for details.)
With the curved ends facing down, slide end plates of
5.
brushbar into slots on the tool.
To replace bottom plate, insert the four tabs on edge of
6.
bottom plate into slots on front of tool. Pivot bottom plate
down and snap closed.
Belt Replacement
Grasp turbine and pull fi rmly to remove.
1.
Remove a screw, and lift the cover belt off.
2.
Remove belt from turbine pulley. Replace with new belt.
3.
With fl at sides of turbine retainers pointing down, slide
4.
retainers into grooves in tool housing and snap into place.
Replace brushbar and bottom plate.
5.
Cleaning Brushbar
Cut off pet hairs or threads surrounding brush with
•
scissors.
DJ68-00644A-01.indd 13
DJ68-00644A-01.indd 13
2011.12.2 8:47:2 AM
2011.12.2 8:47:2 AM
Summary of Contents for SU40 SERIES
Page 15: ...memo ...
