10_
maintenance
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
Empty the Dust Bin when the dirt reaches the “MAX”
1.
line on the side.
Cleaning the Grille Cyclone when the Dust Bin become
2.
clogged.
Check the Pre-Motor Filter at least once a month and
3.
clean or replace as needed.
Replace the Post-Motor Filter every three to six
4.
months.
Note :
More frequent fi lter cleaning or replacing may
be necessary if you are vacuuming new carpet,
fi ne dust, or have allergy concerns. Follow the
instructions on the following pages to perform
these simple maintenance steps.
EMPTY DUST BIN
The Dust Bin needs to be emptied when the dirt reaches the “MAX” line on the side of
it.
Unplug cleaner from electrical outlet.
1.
To remove the Dust Bin from the vacuum body, push the Dust Bin release button
2.
as shown.
Hold dust bin and push down bin release empty button to empty dirt into garbage
3.
container as shown.
Note :
The Dust Bin may be washed in warmwater with a mild
detergent. Reassemble and makesure it is completely dry
before using again.
CLEANING THE GRILE
If the suction is weak although the dust bin is empty, open the cover and clean the
Grille.
Note :
Whenever the Grille is clogged, check the pre-motor fi lter and clear it.
Maintenance
WARNING
To reduce the risk of
electronic shock, turn
Power Switch OFF and
disconnect polarized
plug from electrical
outlet before performing
maintenance or
troubleshooting checks.
Tip:
For maximum cleaning
performance, check and
clean or replace all fi lters
as suggestsd.
Grille
Cyclone
Cyclone
DJ68-00644A-01.indd 10
DJ68-00644A-01.indd 10
2011.12.2 8:46:53 AM
2011.12.2 8:46:53 AM
Summary of Contents for SU40 SERIES
Page 15: ...memo ...