08_
operating the cleaner
POWER SWITCH
The Power Switch is located on the side of the vacuum.
Push the rocker switch “ON” to vacuum, and “OFF” when
cleaning is complete.
HANDLE POSITIONS
Press the handle release pedal, located on the lower left side of the vacuum, with your
foot to place your vacuum into one of three cleaning positions.
Upright
1.
For storage and above fl oor cleaning with tools.
-
Normal Cleaning
2.
Press handle release pedal once. Position used for
-
most household fl oor cleaning tasks.
Low Cleaning
3.
With the vacuum in normal cleaning position, press
-
handle release pedal again. Use for reaching under low
furniture such as tables, chairs or beds.
HEIGHT ADJUSTMENT
The Powerfoot/Rotating Floor Brush can be adjusted to clean several fl oor surfaces.
Note :
For optimal cleaning performance, adjust to the lowest practical setting. If your
cleaner is diffi cult to push, adjust to the next higher setting. Always ensure that
the correct height setting is used for your fl ooring type as damage may occur if
the height setting is not changed to refl ect your fl ooring type.
Turn Height Adjustment Knob to desired setting.
1.
Bare fl oor Setting
For bare fl oors.
-
Medium Settings
For short and medium pile carpets.
-
Highest Setting
For plush pile carpet
-
TRANSPORTING CLEANER
To move your cleaner from room to room,
1.
put the Handle in the upright position, tilt the
cleaner back on its rear wheels and push
forward.
The cleaner can also be moved by using the
2.
Carrying Handle located on the top of the Dust
Bin.
Operating the cleaner
Carrying
Handle
DJ68-00644A-01.indd 08
DJ68-00644A-01.indd 08
2011.12.2 8:44:35 AM
2011.12.2 8:44:35 AM
Summary of Contents for SU40 SERIES
Page 15: ...memo ...