Samsung SRD-450 User Manual Download

Page: 66 / 89

66_

web viewer

IP Setup Setting

From the left menu tree, select <

Network

Click <

Network

Check the network connection status and make your
changes as necessary in details.

For more information, refer to “

IP SETUP

”. (Page 36)

Click <

Your changes will be saved.

E-mail Setting

From the left menu tree, select <

Network

Click <

E-mail

Make your changes as necessary in details.

For more information, refer to “

E-MAIL

”. (Page 38)

Click <

Your changes will be saved.

HDD Event Setting

From the left menu tree, select <

Sensor

Click <

HDD Event

Make your changes as necessary in details.

For more information, refer to “

HDD EVENT

”. (Page 40)

Click <

Your changes will be saved.

Alarm Input Setting

From the left menu tree, select <

Sensor

Click <

Alarm Input

Make your changes as necessary in details.

For more information, refer to “

ALARM INPUT

”. (Page 41)

Click <

Your changes will be saved.



Summary of Contents for SRD-450


























































































Search results

Summary of Contents for SRD-450

Reviews:

Related manuals for SRD-450

Brands by name

Popular brands

Samsung SRD-450, User Manual

Search results

Summary of Contents for SRD-450

Reviews:

Related manuals for SRD-450

Brands by name

Popular brands