Samsung SR10F71UC User Manual Download Page 33

Page: 33 / 56

operating

_33

03 OPERA

TING

Timer Reservation

In this mode, you can schedule the cleaner to start a once-off
cleaning run from a particular time.

■

A scheduled cleaning run is only performed when the cleaner is
docked to the charger station.

Remote Control

Conﬁ guration Sequence

Blinks

Decrease

Increase

Press the Timer/Weekly
button.

The current setting is
displayed and

blinks.

Press the

button to

set the hour.

❈

Cleaning Mode

If there is no previous
reservation, the cleaning
mode is set to Auto mode. If
a reservation exists, cleaning
mode is set to the conﬁ gured
mode.

Blinks

Decrease

Increase

Press the Timer/Weekly
button.

The time increases/decreases
by 5 minutes. Press the

button to set the minutes.

Blinks

Decrease

Increase

Press the Timer/Weekly
button. Press the

button to set the cleaning
mode.

You can select either Auto or
Max cleaning mode.

Blinks

Press the Timer/Weekly
button.

The value you set will
blink and the settings are
completed.

When the settings are
completed, the conﬁ gured
time and

are displayed.

Canceling the Settings

If you press the Start/Stop button while the cleaner is charging
or you are setting the time, the settings are canceled.

Please take note that the settings are canceled if the cleaner
is detached from the charger station.

Timeout

If there is no input for 1 minute while you are setting the time,
the cleaner exits Time Set mode automatically.

DJ68-00691B-EN.indd 33

13. 01. 30 오후 8:22

Summary of Contents for SR10F71UC

























































Search results

Summary of Contents for SR10F71UC

Reviews:

Related manuals for SR10F71UC

Brands by name

Popular brands

Samsung SR10F71UC, User Manual

Search results

Summary of Contents for SR10F71UC

Reviews:

Related manuals for SR10F71UC

Brands by name

Popular brands