background image

a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the 
entire combination fi ts its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code 
with the library. 

We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary 
General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. 
These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license 
provides advantages in certain special circumstances. 

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it 
becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that 
a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free 
software only, so we use the Lesser General Public License. 

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body 
of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the 
whole GNU operating system, as well as its variant, the GNU/Linux operating system. 

Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program 
that is linked with the Library has the freedom and the wherewithal to run that program using a modifi ed version of the Library. 

The precise terms and conditions for copying, distribution and modifi cation follow. Pay close attention to the difference between 
a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the 
latter must be combined with the library in order to run. 

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0.

 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder 

or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this 
License”). Each licensee is addressed as “you”. 

A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs 
(which use some of those functions and data) to form executables. 

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on 
the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a 
portion of it, either verbatim or with modifi cations and/or translated straightforwardly into another language. (Hereinafter, translation 
is included without limitation in the term “modifi cation”.) 

“Source code” for a work means the preferred form of the work for making modifi cations to it. For a library, complete source code 
means all the source code for all modules it contains, plus any associated interface defi nition fi les, plus the scripts used to control 
compilation and installation of the library. 

Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its scope. The act of 
running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a 
work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the 
Library does and what the program that uses the Library does. 

1.

 You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided 

that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep 
intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with 
the Library. 

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange 
for a fee. 

2.

 You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and 

distribute such modifi cations or work under the terms of Section 1 above, provided that you also meet all of these conditions: 

• 

a)

 The modifi ed work must itself be a software library. 

•  

b)

 You must cause the fi les modifi ed to carry prominent notices stating that you changed the fi les and the date of any 

change. 

•  

c)

 You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this 

License. 

•  

d)

 If a facility in the modifi ed Library refers to a function or a table of data to be supplied by an application program 

that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith 
effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and 
performs whatever part of its purpose remains meaningful. 

(For example, a function in a library to compute square roots has a purpose that is entirely well-defi ned independent 
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this 
function must be optional: if the application does not supply it, the square root function must still compute square 
roots.)

These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from the Library, 
and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply 
to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole 

DJ68-00691B-EN.indd   51

DJ68-00691B-EN.indd   51

13. 01. 30   오후 8:23

13. 01. 30   오후 8:23

Summary of Contents for SR10F71UC

























































Reviews: