background image

OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA 
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY 
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. 

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free 
software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, 
under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source fi le to most 
effectively convey the exclusion of warranty; and each fi le should have at least the “copyright” line and a pointer to where the full 
notice is found.

one line to give the library’s name and an idea of what it does.

Copyright (C) year  name of author

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as 
published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of 
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free 
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

Also add information on how to contact you by electronic and paper mail. 

You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the 
library, if necessary. Here is a sample; alter the names: 

Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random 
Hacker.

signature of Ty Coon, 1 April 1990

Ty Coon, President of Vice

That’s all there is to it!

- JPEG

This software is based in part on the work of the Independent JPEG Group.

- OpenCV :

IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. 

By downloading, copying, installing or using the software you agree to this license.

If you do not agree to this license, do not download, install, copy or use the software.

License Agreement 

For Open Source Computer Vision Library

Copyright (C) 2000-2008, Intel Corporation, all rights reserved.

Copyright (C) 2008-2010, Willow Garage Inc., all rights reserved.

Third party copyrights are property of their respective owners.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.

The name of the copyright holders may not be used to endorse or promote products derived from this software without specifi c 
prior written permission.

This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including, 
but not limited to, the implied warranties of merchantability and fi tness for a particular purpose are disclaimed. In no event shall 
the Intel Corporation or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages 
(including, but not limited to, procurement of substitute goods or services; loss of use, data, or profi ts; or business interruption) 
however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising 
in any way out of the use of this software, even if advised of the possibility of such damage. 

DJ68-00691B-EN.indd   54

DJ68-00691B-EN.indd   54

13. 01. 30   오후 8:23

13. 01. 30   오후 8:23

Summary of Contents for SR10F71UC

























































Reviews: