Samsung SPH-M520, Owner'S Manual, Page: 155 / 287

Section 2H: Using Your Phone’s Voice Services 129
V
o
ice Ser
vices
Using Call <Name or #>
You can voice dial from your phone with a single command by saying
“
Call ” followed by a name or nickname (see “Calling Nicknames” on
page 130) and (optionally) a label stored in your Contacts list; or say “ Call ”
followed by a valid phone number. You can also say “ Call ” by itself and be
prompted for the name or number.
Calling Contacts Entries
To place a call using Call <Name or # > :
1.
Press and hold .
2.
Say “ Call ” followed by the name and the label for the number you
wish to call. For example, say “ Call John Mobile .” The phone dials
the number stored for the contact “ John ” with the label “ Mobile .”
If the location recognized for the name does not have a number stored in
Contacts, your phone will play the message “
No number available, John
Smith, Mobile, ” and then launch the Contacts application for that name.
If a name has only a single number, or if you know the name but are not
sure which number to call, say “
Call ” followed by the name only. For
example, say “ Call John .” If the name is recognized and there is only one
number for the name, your phone immediately places the call. If there are
multiple numbers stored for the contact, the phone prompts you with
“
Which Number? ” and displays a list of options. You can select an option
by saying it or by using your keypad.