English
_21
●
NETWORK CONNECTION AND SETUP
You can set up the network settings according to your network configurations.
CONNECTING THE NETWORK ENCODER DIRECTLY TO
LOCAL AREA NETWORKING
Connecting to the network encoder from a local PC in the LAN
Launch an Internet browser on the local PC.
Enter the IP address of the network encoder in the address bar of the browser.
A remote PC in an external Internet out of the LAN network may not be able to connect to the
network encoder installed in the intranet if the port-forwarding is not properly set or a fi rewall is set.
In this case, to resolve the problem, contact your network administrator.
By factory default, the IP address will be assigned from the DHCP server automatically.
If there is no DHCP server available, the IP address will be set to 192.168.1.100.
To change the IP address, use the IP Installer.
For further details on IP Installer use, refer to “
Static IP Setup
”. (Page 26)
1.
2.
M
network connection and setup
AUDIO IN
AUDIO O
UT
VIDEO I
N
LOOP O
UT
AUDIO I
N
AUDIO O
UT
VIDEO I
N
LOOP O
UT
AUDIO I
N
AUDIO O
UT
VIDEO I
N
LOOP O
UT
AUDIO IN
AUDIO O
UT
VIDEO IN
LOOP O
UT
Network Encoder
Network Encoder
Local PC
Firewall
External Remote PC
DDNS Server
(Data Center, KOREA)
INTERNET
<Local Network>
