Samsung SPE-100, User Manual

Page: 27 / 94

English _27
●
NETWORK CONNECTION AND SETUP
In the < Address > pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
network encoder will be set auto-
matically so you don't need to input it
manually.
If using a broadband router
IP Address : Enter an address falling in
the IP range provided by the Broadband
router.
ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
Subnet Mask : The < Subnet Mask > of
the Broadband router will be the
<
Subnet Mask > of the network encoder.
Gateway : The < Local IP Address > of
the Broadband router will be the < Gateway > of the network encoder.
The settings may differ depending on the connected Broadband router model.
For more information, refer to the user manual of the applicable router.
Refer to the “ Port Range Forward (Port Mapping) Setup ” section of the Broadband router’s
documentation. (Page 30)
If not using a broadband router
For setting < IP Address >, < Subnet Mask >, and < Gateway >, contact your network administrator.
In the < Port > pane, provide
necessary information.
HTTP Port : Used to access the
network encoder using the Internet
browser, defaulted to 80. Use the
spin button to change the HTTP Port
value.
VNP Port : Used to control the video
signal transfer, defaulted to 4520.
Enter the password.
This is the login password for the “
admin ” user who accesses the network encoder.
The default password is “ 4321 ”.
3.
y
y
y
y
M


4.
y
y
5.