Samsung SPE-100 User Manual Download Page 47

Page: 47 / 94

English

_47

●

SETUP SCREEN

NETWORK SETUP

Interface

From the Setup menu, select the
<

Network (

)

> tab.

Click <

Interface

Set the <

Interface

> and <

IPv6 setup

as necessary.

IP type : Select an IP connection
type.

Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.

DHCP : Specify the DNS1 and
DNS2.

PPPoE : Specify the DNS1, DNS2, ID and password.

If you set it to <

Manual

>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.

MAC address : Shows the MAC address.

IP address : Displays the current IP address.

Subnet mask : Displays the <

Subnet Mask

> for the set IP.

Gateway : Displays the <

Gateway

> for the set IP.

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

IPv6 use : Specify the use of IPv6.

Mode : If you select <

IPv6 use

>, the mode is enabled.

IPv6 address : Obtains the IPv6 address to access the IPv6 network.

When done, click [

Apply (

)

The IP address allocation will be restored to the default DHCP. At the moment, if it fails to detect a
DHCP server within 1 minute, the address will be reverted to the previous setting automatically.



y
y
y
y
y
y
y
y



Summary of Contents for SPE-100































































































Search results

Summary of Contents for SPE-100

Reviews:

Related manuals for SPE-100

Brands by name

Popular brands

Samsung SPE-100, User Manual

Search results

Summary of Contents for SPE-100

Reviews:

Related manuals for SPE-100

Brands by name

Popular brands