Samsung SPE-100, User Manual

Page: 31 / 94

English _31
●
NETWORK CONNECTION AND SETUP
Setting up Port Range Forward for several network encoders
When several network encoder connect to one Broadband router device, you should
forward the TCP 943 port of the router to the TCP 943 port of a connected network
encoder.
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from
the web page of the network encoder.
TCP 943 port is a port for the Silverlight policy server of a network encoder.
When Network encoder1 and Network encoder2 are connected to a router :
You can set a rule of Port Forwarding on the Broadband router device through its
confi guration web page.
You cannot change the Silverlight policy server port of a network encoder.
You can change the ports of the network encoder except the policy server port
through its confi guration web pages.
J

y
y
y
y
User Internet
Ù
Broadband router
Start End Protocol IP Address
943 943 TCP 192.168.1.100
3000 3000 TCP/UDP 192.168.1.100
3001 3001 TCP/UDP 192.168.1.101
4520 4520 TCP/UDP 192.168.1.100
4521 4521 TCP/UDP 192.168.1.101
8080 8080 TCP/UDP 192.168.1.100
8081 8081 TCP/UDP 192.168.1.101
Ú
Network Encoder1
(192.168.1.100)
Web Server Port 8080
VNP Port 4520
RTSP Port 3000
Policy Server Port 943
Ù
Network Encoder2
(192.168.1.101)
Web Server Port 8081
VNP Port 4521
RTSP Port 3001
Policy Server Port 943
Ù