Samsung SPE-100 User Manual Download Page 14

Page: 14 / 94

installation & connection

14_

installation & connection

INSERTING/REMOVING AN SD MEMORY CARD

Inserting an SD Memory Card

Push the SD memory card in the direction of the arrow shown in the diagram.

Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the
SD memory card.

Removing an SD Memory Card

Gently press down on the exposed end of the memory card as shown in the diagram to
eject the memory card from the slot.

Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the
slot when released.

To remove the SD memory card, set <

Record

> to <

Off

> from <

SD record

> and press [

Apply

(

)

]. (page 54)

If you have saved data in the SD memory card, removing the SD memory card prior to setting
record to OFF will cause damage to the data stored in the card.

If the SD memory is inserted and when record is on, the SD LED indicator on the rear of the
network encoder will turn on.

If there occurs a problem in the SD memory, the SD LED indicator will blink.



installation & connection

Summary of Contents for SPE-100































































































Search results

Summary of Contents for SPE-100

Reviews:

Related manuals for SPE-100

Brands by name

Popular brands

Samsung SPE-100, User Manual

Search results

Summary of Contents for SPE-100

Reviews:

Related manuals for SPE-100

Brands by name

Popular brands